FR3A Datasheet, PDF (1/2 Pages) Surge Components – FAST SWITCHING SURFACE MOUNT RECTIFIER VOLTAGE - 50 to 800 Volts CURRENT -3.0 Amperes

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
FR3A
THRU
FR3K
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER
VOLTAGE RANGE - 50 to 800 Volts
CURRENT - 3.0 Amperes
FEATURES
* ldeal for surface mounted applications
* Low leakage current
* Glass passivated junction
SMC ( DO-214AB )
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
*Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
* Polarity: As marked
* Mounting position: Any
* Weight: 0.24 gram
.128(3.25)
.108(2.75)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current TA = 75^oC
Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum Forward Voltage at 3.0A DC
Maximum DC Average Reverse Current at
Rated DC Blocking Voltage
Maximum Reverse Recovery Time (Note 3)
@TA = 25^oC
@TA = 125^oC
Typical Thermal Resistance (Note 2)
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
IFSM
VF
IR
trr
RθJL
CJ
TJ, TSTG
FR3A
50
35
50
FR3B
100
70
100
150
NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC
2. Thermal Resistance (Junction to Ambient), 0.4x0.4in² (10.0X10.0mm²) copper pads to each terminal.
3. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.
FR3D FR3G
150
200
105
140
150
200
3.0
100
1.2
10
300
250
10
60
-65 to + 175
FR3J
300
210
300
FR3K
400
280
400
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
uAmps
500
nSec
0_{C/ W}
pF
0_C
338
NENXNETXETXT BBAACBCKAKCK EEXXITEITXI