DCR150-4 Datasheet, PDF (1/1 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SENSITIVE GATE SILICON CONTROLLED RECTIFIERS VOLTAGE RANGE - 200 to 600 Volts

DC COMPONENTS CO., LTD.
R
DISCRETE SEMICONDUCTORS
DCR150-4
THRU
DCR150-8
TECHNICAL SPECIFICATIONS OF SENSITIVE GATE SILICON CONTROLLED RECTIFIERS
VOLTAGE RANGE - 200 to 600 Volts
CURRENT - 1.5 Amperes
Description
* Driven directly with IC and MOS device
* Feature proprietary, void-free glass passivated chips
* Available in voltage ratings from 200 to 600 volts
* Sensitive gate trigger current
* Designed for high volume, line-powered control
application in relay lamp drivers, small motor controls,
gate drivers for large thyristors
Pinning
1 = Cathode, 2 = Gate, 3 = Anode
Absolute Maximum Ratings(TA=25^oC)
Characteristic
Symbol Rating Unit
Peak Repetitive Off-State
Voltage and Reverse Voltage
DCR150-4
DCR150-6
DCR150-8
VDRM,
VRRM
200
400
600
V
On-State RMS Current
(TA=57^oC, 180^o Conduction Angles)
IT(RMS)
1.5
A
Peak Non-repetitive Surge Current
(1/2 Cycle, Sine Wave 60Hz)
ITSM
15
A
Forward Peak Gate Current
IGM
1.0
A
Forward Peak Gate Power Dissipation
PGM
0.1
W
Forward Average Gate Power Dissipation
Operating Junction Temperature
Storage Temperature
PG(AV)
0.01
W
TJ
-40 to +110 ^oC
TSTG -40 to +150 ^oC
TO-92
.190(4.83)
.170(4.33)
.190(4.83)
.170(4.33)
.500 _Min
(12.70)
.050 _Typ
(1.27)
.022(0.56)
.014(0.36)
(2.1.5040)Typ
2^oTyp
2^oTyp
.022(0.56)
.014(0.36)
321
.148(3.76)
.132(3.36)
5^oTyp 5^oTyp (1.0.2570)Typ
Dimensions in inches and (millimeters)
Electrical Characteristics
(Ratings at 25^oC ambient temperature unless otherwise specified)
Characteristic
Symbol
Min
Typ
Peak Repetitive Forward or Reverse ^TJ=25oC
-
-
Off-State Blocking Current
TJ=110^oC ^{IDRM, IRRM}
-
-
Peak Forward On-State Voltage
VTM
-
-
Continuous DC Gate Trigger Current
IGT
-
-
Continuous DC Gate Trigger Voltage
VGT
-
-
DC Holding Current
IH
-
-
Critical Rate-of-Rise of Off-State Voltage
dv/dt
-
25
Gate Controlled Turn-on Time(tD+tR)
Tgt
-
3.5
Thermal Resistance, Junction to Case
RθJC
-
75
Max
Unit
Test Conditions
10
VAK=Rated VDRM or VRRM
200
µA
RGK=1KΩ
1.7
V
ITM=1A Peak
200
µA VAK=7V DC, RL=100Ω
0.8
V
VAK=7V DC, RL=100Ω
5.0
mA RGK=1KΩ
-
V/µS RGK=1KΩ
-
µsec IGT=10mA
-
o_{C/W -}