BR3505W Datasheet, PDF (1/2 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
BR3505W
THRU
BR3510W
TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 35 Amperes
FEATURES
* Plastic case with heatsink for Maximum Heat Dissipation
* Surge overload ratings-400 Amperes
* Low forward voltage drop
MECHANICAL DATA
* Case: Molded plastic with heatsink
* Epoxy: UL 94V-0 rate flame retardant
* Lead: MIL-STD-202E, Method 208 guaranteed
* Polarity: As marked
* Mounting position: Any
* Weight: 30 grams
BR-25W
METAL HEAT SINK
TYP
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Output Current at Tc = 55^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum Forward Voltage Drop per element at 17.5A DC
Maximum DC Reverse Current at Rated
@TA = 25^oC
DC Blocking Voltage per element
I²t Rating for Fusing (t<8.3ms)
@TA = 100^oC
Typical Junction Capacitance ( Note1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts
2. Thermal Resistance from Junction to Case per leg.
SYMBOL
VRRM
VRMS
VDC
IO
BR3505W BR351W BR352W BR354W BR356W BR358W BR3510W UNITS
50
100
200
400
600
800 1000 Volts
35
70
140
280
420
560
700 Volts
50
100
200
400
600
800 1000 Volts
35
Amps
IFSM
400
Amps
VF
IR
I²t
CJ
RθJ C
TJ,TSTG
1.1
10
500
664
300
2.2
-55 to + 150
Volts
uAmps
A²Sec
pF
0_C/W
0_C
254
NENXNETXETXT BBAACBCKAKCK EEXXITEITXI