AB05S Datasheet, PDF (1/2 Pages) Dc Components – RECTIFIER SPECIALISTS

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
AB05S
THRU
AB10S
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 0.8 Ampere
FEATURES
*High surge current capability
* Ideal for printed circuit board
* Glass passivated junction
ABS
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Terminals: MIL-STD-202E, Method 208 guaranteed
* Polarity: Symbols molded or marked on body
* Mounting position: Any
* Weight: 0.09 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.161(4.1)
.154(3.9)
.248(6.7)
.264(6.3)
.031(0.8)
.019(0.5)
.205(5.2)
.189(4.8)
.008(0.20)
.002(0.05)
.181(4.6)
.165(4.2)
.012(0.3)
.008(0.2)
.059(1.5)
.047(1.2)
.028(0.7)
.020(0.5)
Dimensions in inches and (millimeters)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Output Current at TA = 50 ^oC (Note 1)
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum DC Forward Voltage Drop per Bridge Element at 0.8A DC
Maximum Reverse Current at rated
@TA = 25^oC
DC Blocking Voltage per element
@TA = 125^oC
Typical Junction Capacitance ( Note 2)
Typical Thermal Resistance (Note 3)
Operating and Storage Temperature Range
NOTES: 1. Mounted on P.C. board with 4x(5x5mm²) copper pad.
2. Measured at 1.0 MHZ and applied reverse voltage of 4.0V DC.
3. Thermal resistance junction to ambient.
SYMBOL
VRRM
VRMS
VDC
IO
IFSM
VF
IR
CJ
RθJA
T J,TSTG
AB05S
50
35
50
AB1S
100
70
100
AB2S
200
140
200
AB4S
400
280
400
0.8
25
AB6S
600
420
600
AB8S
800
560
800
AB10S UNITS
1000
700
1000
Volts
Volts
Volts
Amps
Amps
1.1
5.0
100
13
85
-50 to + 150
Volts
µAmps
pF
0_C/W
0_C
1
www.dccomponents.com