CN1A100KC Datasheet, PDF (4/13 Pages) DB Lectro Inc – CHIP TYPE, NON-POLARIZED

CORRESPONDING TO RoHS DIRECTIVE
Aluminum electrolytic
capacitors
RoHS compliant
RoHS
restricted
substances
Most concerns
on terminals
Plating on
terminals
Chip type
Yes
Radial lead type
Yes
Snap-in type
Yes
Change plating from Sn-Pb to Change plating from Sn-Pb to Change plating from Sn-Pb to
Sn
Sn
Sn
Construction of
terminals
Plating
characters
Fe/Cu/Sn
Fe/Cu/Sn
Fe/Cu/Sn
Plating thickness 12Pm
Plating thickness 12Pm
Plating thickness 10Pm
Plating type matte
Plating type matte
Plating type matte
No heat treatment after plating No heat treatment after plating No heat treatment after plating
Insulating
sleeve
No used
Replace PVC with PET
Replace PVC with PET
(where customer designated) (where customer designated)
Please see "Lead Free Reflow
Resistance to Soldering Condition" for chip
Pb
soldering heat type aluminum electrolytic
No change
capacitors
No change
Solderability
No difference with Sn-Pb
No difference with Sn-Pb
No difference with Sn-Pb
Tensile strength No difference with Sn-Pb
No difference with Sn-Pb
No difference with Sn-Pb
Whisker
No difference with Sn-Pb
Room storage test: 20~25qC,
30~80%RH, 4000hrs.
Aging test: 60r5qC, 93
+2/-3%RH, 4000hrs.
Thermal cycle test: -55
+0/-10qC to 85 +10/-0qC, 3
cycles/hour, 1000 cycles
No difference with Sn-Pb
Room storage test: 20~25qC,
30~80%RH, 4000hrs.
Aging test: 60r5qC, 93
+2/-3%RH, 4000hrs.
Thermal cycle test: -55
+0/-10qC to 85 +10/-0qC, 3
cycles/hour, 1000 cycles
Whisker is not observed
Room storage test: 20~25qC,
30~80%RH, 4000hrs.
Aging test: 60r5qC, 93
+2/-3%RH, 4000hrs.
Thermal cycle test: -55
+0/-10qC to 85 +10/-0qC, 3
cycles/hour, 1000 cycles
Cr⁶⁺
Plating material < 2ppm
< 2ppm
< 2ppm
Hg
< 2ppm
< 2ppm
< 2ppm
Cd
< 2ppm
< 2ppm
< 2ppm
PBB
Not detected
Not detected
Not detected
PBDE
Not detected
Not detected
Not detected
Identification for RoHS
compliance products
Add "Pb free" or "RoHS"
marking on inner and outer
carton label (where customer
designated)
Add "Pb free" or "RoHS"
marking on inner and outer
carton label (where customer
designated)
Add "Pb free" or "RoHS"
marking on inner and outer
carton label (where customer
designated)
MSL Level
(IPC/JEDEC J-STD-020C)
Not available
No need for dry package
Not available
No need for dry package
Not available
No need for dry package
DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com