MSB02001 Datasheet, PDF (2/13 Pages) DB Lectro Inc – Functional characteristics

Functional characteristics
Dimensional class:
low
MSB
RoHS
2002/95/EC
Standard colour:
green
Height:
10 mm (.394 in)
0
10
½
20
Max approved wire sections:
solid: 1.5 mm² (IMQ); 16 AWG (UL)
stranded 1 mm² (IMQ); 16 AWG (UL)
1
30
mm in
solid and stranded for 55° and “T” version
1.5 mm² (IEC EN); 14 AWG (UL)
clamp opening size:
2.5 x 1.7 mm (.098 x .067 in)
2.5 x 1.9 mm (.098 x .075 in) 55° version
2.45 x 1.98 mm (.096 x .078 in) “T” version
Versions:
side stackable,
modular
single mould poles:
from 2 to 25
straight version
modular
90° version
modular
straight version
modular
Pitches:
metric 5 mm, 10 mm
(.197 in, .394 in)
imperial 5.08 mm, 10.16 mm
(.200 in, .400 in)
s 270°C
“T” version with central pin
modular
s 270°C
55° version
side stackable
s 270°C
55° version
modular
s 270°C
Solderable at a temperature up to
270°C / 518°F
Brief description
s 270°C
straight, modular
s 270°C
straight, side stackable
s 270°C
from 2 to 9 poles
BSC__00_-0R
for rising clamp
Although the MSB series of terminal blocks is small in size it offers a high
number of connection possibilities; in fact it can wire up to 1.5mm²
(15 AWG) and consequently a certified current range of 17.5A can be
reached.
It is available in 5 mm (.197 in) and 10 mm (.394 in) metric pitches and
5.08 mm (.200 in) and 10.16 mm (.400 in) Imperial pitches, in monolithic
blocks from 2 to 25 poles, with insertion of the wire parallel to the PCB,
inclined at 55° or at 90° standard or in "T" version.
All the housings are modular, therefore it is possible to mounted on the
PCB the monolithic terminal blocks from 2 to 25 poles separately, or to
compose the basic terminal blocks until any number of poles is obtained.
By taking advantage of this particular characteristic a minimum stock of
basic terminal blocks can be kept.
It is simple to manage product, warehouse and assembly with the Kit
packages because several versions can be achieved with only one code,
the part-numbers being significantly reduced and the risk of making
mistakes is also reduced.
MSB with pegs
The straight 2 pole MSB is also available with clamping pegs
moulded in the plastic housing to secure it to the PCB. With this
solution the nominal tightening torque can be applied and the most
restrictive guidelines set by the international standards (VDE) are
passed.
56