3DC1515 Datasheet, PDF (2/4 Pages) ECM Electronics Limited. – 15mm2 3D Transponder Inductor

3DC1515
SMD 3D Coil 15x15x4mm
C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas. Málaga (Spain) Phone [phone] Fax [phone]
E-mail: [e-mail] Web http://www.grupopremo.com
3. Materials
Core:
Ferrite Core
SMD Base: LCP
Leadframe: CuSn6 / Cu / Sn
Wires:
Enamelled and Selfbonding copper wire
Adhesive: Epoxy-based adhesives
Label:
Acrylate
Remark : Products comply with RoHS requirements
4. General Specifications and Recommended Reflow Profile
Typical Operating Frequency 125KHz
Storage Temperature -40 ºC → +85 ºC
Operating Temperature -40 ºC → +85 ºC
ºC
300
275
210
200
180
140
100
max 360 sec
90 sec
30 sec
2-4ºC/ sec
preheating 60 - 120 sec
Lead Free Reflow Profile
0
100
190 200
280 300
cooling zone
360 _{400 (sec)}
5. Electrical Characteristics
3DC1515
Code
Lx,y,z Qx,y Freq Cres SRFx,y SRFz DCRx,y DCRz Sensitivity x,y,z Length Width Height
(mH) Min (KHz) (pF) (KHz) (KHz) (Ohm) (Ohm) (mV/App/m) (mm) (mm) (mm)
Min
Min
Max
Max
Min
3DC15-0247J 2.47 23 125 656 500 1000 75
75
55
3DC15-0258J 2.58 23 125 628 500 800
75
75
57
3DC15-0345J 3.45 27 125 470 450 800
85
100
67
3DC15-0405J 4.05 27 125 400 400 800
98
98
3DC15-0477J 4.77 28 125 340 380 800 100
136
72
85
15.5 17.5 3.8
3DC15-0491J 4.91 27 125 330 350 750 105
140
85
3DC15-0720J 7.20 30 125 225 330 700 120
172
95
3DC15-1000J 10.00 25 125 162 250 550 165
258
105
2
Three Axes Transponder Inductors
All rights reserved. Share, use or communication of the contents of this document not permitted without written authorisation.