SD200L Datasheet, PDF (1/2 Pages) DB Lectro Inc – Provides transparent RS232 serial cable replacement.

Bluetooth Serial Adapter,
SD100/200
Features
· Provides transparent RS232 serial cable replacement.
· Supports Bluetooth stack 1.2 - improved AFH(Adaptive
Frequency Hopping), Fast connection.
· Transmit Power - SD100 : Max. +18dBm
SD200 : Max. +4dBm
· Receiving Sensitivity - SD100 : -88dBm(0.1%BER)
SD200 : -80dBm(0.1%BER)
· Antenna gain - Stub : +2dBi, Dipole : +3dBi, Patch : +9dBi
· Supports Bluetooth Serial Port Profile.
· Interoperability with PDA, laptops etc.
· Supports firmware upgrade via windows-based software
(ParaniUpdater)
· Working distance(In an open field)
- Parani-SD100 : Class 1, Nom. 100 meters,
up to 1000m using patch antenna
- Parani-SD200 : Class 2, Nom. 30 meters,
up to 300m using patch antenna
· Software-free configuration support using DIP-Switch and
pairing button
· Parani-SD200 : Supports battery pack(Two AA batteries)
· No external drivers required.
Panel Layout
Factory Reset Switch
Parani-SD100
DIP Switch Set
LED Set
Parani-SD Series is a Bluetooth serial adapter product
line based on Bluetooth technology. Parani-SD Series enables
RS232-based serial devices to communicate wirelessly
throughout the range of 30m~300m(Parani-SD200-Class 2) or
100m~1000m(Parani-SD100-Class 1).
Users may configure the Parani-SD Series by using combination of
DIP-switch and Pairing button, easy-to-use Windows-based utility
software or by using standard AT command set.
Using DIP-switch of the Parani-SD Series, user can simply configure
baud rate and hardware flow control settings of the Parani-SD
Series. Pairing-button enables two Parani-SD Series units to be
connected automatically.
Flexible power supply options allow users to choose which options
suits them best, i.e. Power by DC power cable, Power by external
DC adapter, Power by USB power cable, Power by pin 9 of DB9
connector. The Parani-SD supports battery pack that can carry
two AA batteries. Users can use both general type batteries or
rechargeable ones. Battery pack allows users to recharge the
batteries.
Typical application areas of the Parani-SD Series include :
- RS232 cable replacement
- Wireless Factory monitoring
- Truck/Bus monitoring system
- PLC programming
- Car Diagnostics
- Wireless Printing
- Wireless POS system
- Wireless logistics
- Wireless machine(healthcare/industrial) monitoring
Factory Reset Switch
Pairing Button
Parani-SD200
Stub Antenna
LED Set
Pairing button
On this side:
DC Connector
On the opposite side:
ON/OFF Switch
Stub Antenna
www.sena.com
DIP Switch Set
On this side:
DC Connector
On the opposite side:
ON/OFF Switch
Battery Pack