SBU16A Datasheet, PDF (1/2 Pages) DB Lectro Inc – 15W Open frame Switching Power Supplies For I.T.E.

SPU16A SERIES
15W Desk Top Switching Power Supplies For I.T.E.
Description:
The SPU16A series of AC/DC switching mode power supplies
provide 15 Watts of continuous output power and is well-suited
for a variety of applications. All supplies are UL 94V-1 min
compliant. All model meet FCC Part-15 class B and CISPR-22
class B emission Limits and are designed to comply with UL/c-
UL(UL 60950-1:2ndEdition), TUV/GS(EN 60950-1:2ndEdition) and
new CE requirements. All units are 100% burned-in and tested.
Features:
Wide Operating Voltage 90 to 264VAC,47 to 63 Hz
IEC-320-C14 Input Inlet
Optional Output Connector (See appendix)
Single Output
Energy Star 2.0, Efficiency level V
Class I
2 year warranty
Electrical Characteristics:
Safety Approvals:
CB
S&E
RT
PS
E
Agree to apply for the PSE
if order on hand
Sym.
Parameter
Test Conditions
Min. Typ. Max. Unit
Safety Approvals Input
Vin ^{Voltage Range}
100
240 V A C
Operate Voltage Range
90
264 V A C
fin Input Frequency
47
63
Hz
Po ^{Output Power Range}
Vin=90 to 264VAC
15
W
Vo Output Voltage Range
See rating chart V
Io Output Current Range
See rating chart A
Iil Input Current (Low Line)
Io=Full load, Vin=115VAC
0.4 A
Iih Input Current (High Line)
Irl Low Line Inrush Current
Irh High Line Inrush Current
Eff Efficiency
Io=Full load, Vin=230VAC
Io=Full load, 25°c, Cool start,
Vin=115VAC
Io=Full load, 25°c, Cool start,
Vin=230VAC
Io=Full Load, Vin=230VAC
0.26 A
12 15
A
26 30
A
72
85
%
REG-i Line Regulation
Io=Full Load
0.5 1
%
REG-o Load Regulation
Vin=230VAC
3 10
%
OVP Over Voltage Protection
Nil
%
OCP Over Current Protection
Nil.But,Output protected to short circut conditions %
Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC
4
ms
Thold Hold-Up Time
Io=Full Load, Vin=110VAC
8
ms
Ts Start Up Time
Io=Full Load, Vin=100VAC
0.3 1 2
S
* ^{Vp-p Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC}
Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC
0.5 1
%
0.5 0.75 m A
TC Temperature Coefficient
All output
-0.04
0.04 % /°C
Pno No-Load Power Consumption No load, Vin=240VAC
0 0.4 0.5 W
* ^{Note: The Ripple & Noise which is under 3.3VCD at 2% max}
Environmental :
Sym.
Parameter
Toper Operating Temperature
T e s t Conditions
Tstg Storage Temperature
Ho Operating Humidity
Hr Storage Humidity
MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F
Pd Derate linearly from 100% load at 40 C to 50% load at 70 C
Min. Typ. Max.
0 40 70
-40
85
0
95
0
75
0.1M
Unit
C
C
%
%
Hrs