NEMO10 Datasheet, PDF (1/2 Pages) DB Lectro Inc – Single-chip DIL type network enabler for on-board installation

NEMO10 Embedded Device Server with built-in UART,
Features
- Single-chip DIL type network enabler for on-board
installation
- Compact size, 45mm x 45mm x 18.5mm
- Built-in UART for device interface, data transfer rate up to
115Kbps
- Supports 10Base-T Ethernet interface
- Supports ARP, IP/ICMP, TCP, Telnet, DHCP and PPPoE
- Management by Telnet or console port or HelloDevice
Manager
- +5V input, 0.3W low power consumption
The NEMO10 is a cost-effective and easy-to-use single-chip
network enabler module for system integrators and manufacturers who
need a way to rapidly make their devices network-ready at a minimal
transition cost. The NEMO10 is designed for integration into user devices
by on-board installation. On one end, the NEMO10 is connected to the
device via built-in UART interface. On the other end, it is connected to
the Ethernet RJ45 connector on the board. Within the single-chip DIL
package, the NEMO10 has its own TCP/IP-Ready microprocessor, UART
for serial interface and built-in 10Base-T Ethernet controller that handle
the entire communication between devices over Ethernet.
Bundled with Serial/IP, COM Port redirector from Tactical Software,
the NEMO10 supports reliable serial-TCP communication with users’
devices for existing users’ serial applications.The Windows-based
configuration software,HelloDevice Manager,simplifies initial installation
and management.
Dimensions and Pin Assignment Information
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
Description
GND
Reset
LED (Ethernet Tx)
LED (Ethernet Rx)
LED (Ethernet Link/Collision)
Ethernet Tx-
Ethernet Tx+
Ethernet Rx+
Ethernet Rx-
Vcc
LED (Ready)
LED (Ethernet Act)
Pin No.
13
14
15
16
17
18
19
20
21
22
23
24
Description
Vcc
Console/Data switch
Serial DSR
Serial CTS
Serial DTR
Serial RTS
Serial Rx
Serial Tx
Factory Reset switch
GND
LED (Serial Tx)
LED (Serial Rx)
www.sena.com
12 _{1110 9 8 7 6 5 4 3 2 1}
24
23
22
21
20
19
18
17
16
15
14
13
(45mm x 45mm x 18.5mm, 24 pin DIL package, 2.54 mm pitch)