FRX010-60 Datasheet, PDF (1/3 Pages) DB Lectro Inc – Radial Leaded PTC FRX Series

Radial Leaded PTC FRX Series
FUZETEC
Application:
Wide variety of electronic equipment
Product Features:
Low hold current, Solid state
Radial-leaded product ideal for up to 60V
Operation Current:100mA~3.75A
Maximum Voltage: 60V
Temperature Range: -40
to 85

Agency Approvals: UL(E211981),
C-UL(E211981),
TÜV(R3-50004084)
Electrical Characteristics(23)
Part
Number
Hold Trip Max.Time Maximum Rated Typical Resistance Tolerance
Current Current to Trip Current Voltage Power RMIN R1MAX
IH,A IT,A at 5xIH IMAX,A VMAX,Vdc Pd, W
Ω
Ω
FRX010-60 0.10 0.20
4.0
40
60
0.38 2.50
7.50
FRX017-60 0.17 0.34
3.0
40
60
0.48 2.00
7.00
FRX020-60 0.20 0.40
2.2
40
60
0.41 1.83
4.40
FRX025-60 0.25 0.50
2.5
40
60
0.45 1.25
3.00
FRX030-60 0.30 0.60
3.0
40
60
0.49 0.88
2.10
FRX040-60 0.40 0.80
3.8
40
60
0.56 0.55
1.29
FRX050-60 0.50 1.00
4.0
40
60
0.77 0.50
1.17
FRX065-60 0.65 1.30
5.3
40
60
0.88 0.31
0.72
FRX075-60 0.75 1.50
6.3
40
60
0.92 0.25
0.60
FRX090-60 0.90 1.80
7.2
40
60
0.99 0.20
0.47
FRX110-60 1.10 2.20
8.2
40
60
1.50 0.15
0.38
FRX135-60 1.35 2.70
9.6
40
60
1.70 0.12
0.30
FRX160-60 1.60 3.20 11.4
40
60
1.90 0.09
0.22
FRX185-60 1.85 3.70 12.6
40
60
2.10 0.08
0.19
FRX250-60 2.50 5.00 15.6
40
60
2.50 0.05
0.13
FRX300-60 3.00 6.00 19.8
40
60
2.80 0.04
0.10
FRX375-60 3.75 7.50 24.0
40
60
3.20 0.03
0.08
IH=Hold current-maximum current at which the device will not trip at 23
still air.
IT=Trip current-minimum current at which the device will always trip at 23
still air.
V MAX=Maximum voltage device can withstand without damage at its rated current.
I = MAX Maximum fault current device can withstand without damage at rated voltage (V max).
Pd=Typical power dissipated from device when in the tripped state in 23
still air environment.
RMIN=Minimum device resistance at 23
.
R1MAX=Maximum device resistance at 23
, 1 hour after tripping .
Physical specifications:
Lead material: FRX010~FRX090 Tin plated copper,24 AWG.
FRX110~FRX375 Tin plated copper,20 AWG.
Soldering characteristics:MIL-STD-202, Method 208E.
Insulating coating:Flame retardant epoxy ,meet UL-94V-O requirement.
1
DB LECTRO Inc., 3600-I, boulevard matte, Brossard, QC J4Y2Z2