BCD100 Datasheet, PDF (1/2 Pages) DB Lectro Inc – Fully qualified with Bluetooth v2.0 + EDR specification

Bluetooth Module,
BCD100
Features
· Bluetooth Class 1
· Fully qualified with Bluetooth v2.0 + EDR specification
· Transmit Power: +18dBm Typical
· Receive sensitivity: -90dBm (0.1% BER)
· Size: 27.1 x 14.8 x 2.4mm with shield can
· Extended operating temperature range: -20˚C ~ +80˚C
· Integrated 8Mbit Flash Memory
· USB, Dual UART, I2C, PCM, PIO interfaces
· 802.11 co-existence
· Field-proven SPP (Serial Port Profile) firmware
supporting up to 4 simultaneous multiple connections
· RoHS Compliant
Specifications
Bluetooth
Transmit Power
Receive Sensitivity
TX Output Spectrum-
Frequency range
UART
USB
Interface
Power
Operating
Temperature
Physical
Properties
Approval
Fully qualified with Bluetooth v2.0
+EDR specification
EDR (Enhanced Data Rate)
compliant with v2.0 of specification
for both 2Mbps and 3Mbps
+18dBm Typical (Class1)
-90dBm (0.1% BER)
2401 MHz ~ 2480 MHz
Up to 921 kbps
V1.2
UART, USB, I2C, PCM, PIO
2.7V~3.6V
-20˚C ~ +80˚C
27.1 mm x 14.8 mm x 2.4 mm
( 1.06 in x 0.58 in x 0.09 in )
Bluetooth SIG (QDID: B015728)
The Parani-BCD100 is a Bluetooth Class 1 OEM
module for OEM manufacturers who want to implement Bluetooth
Class 1 functionality with their products cost effectively and
also in timely manner. Users can build their own antenna circuit
around the BCD100 to lower the overall cost while benefit from
the BCD100’s field-proven standard SPP (Serial Port Profile)
firmware provided with no additional cost.
The BCD100 supports Class 1 Bluetooth transmission level for
longer communication distance. The BCD100 supports UART,
USB, I2C, PCM, PIO interfaces for the communication with the
OEM products.
The BCD100 is provided with Bluetooth v2.0 compatible
firmware runs internally for SPP (Serial Port Profile) applications
by default. The SPP firmware supports up to 4 simultaneous
multiple connections and is designed to work out-of-box for real
world SPP applications such as POS (Point-of-sales), industrial
automation, remote metering and other various applications.
Optionally, the BCD100 can be supplied with only software stack
up to HCI level so entire Bluetooth stack runs on the host side
for the application such as USB dongles for computers, or OEM
manufacturers can even develop and embed their own firmware
into the BCD100.
The BCD100 is fully qualified with Bluetooth v.2.0+EDR
specification so OEM manufacturers can save cost and time for
overall OEM product certifications, which makes the BCD100
ideal solution for larger volume and cost sensitive applications.
Device Diagram
Parani-BCD100
RF_IN/OUT
RF Amplifier
Circuit
LNA
PA
RAM
2.4GHz
Radio
Baseband
DSP
IO
Voltage
Regulator
1.8V core
MCU
BlueCore4 External
Crystal
26Mhz
Flash Memory
8Mb
USB
UART
SPI
PIO
PCM
VCC 3.3V
www.sena.com