9E Datasheet, PDF (1/2 Pages) DB Lectro Inc – Ultra Density Surface Mount

9E Series
Ultra Density Surface Mount
PRODUCT DESCRIPTIONS
Development philosophy with inherited reliability and
assembly capacity of 1E Series was put into succession
of the 9E Series small form factor reed relay.
Compared with 1E-14J, the mounting area for this
series achieved 30% shrinkage with the same great
reliability. The 9E Series has a long product life that is
widely accepted by the ATE, telecommunications and
wireless communications markets.
SPECIFICATIONS
9E Series
Parameters
Coil Specifications
Units
Nominal Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
Contact Ratings
VDC
Ω
VDC Max
VDC Min
Switching Voltage
Switching Current
Carry Current
Contact Rating
Life Expectancy
Contact Resistance
Contact Resistance Stability
Volts
Amps
Amps
Watts
x10⁶ Cycle
mΩ
mΩ
Relay Specifications
9E -50J
3.3
100
2.15
0.7
9E -10J 9E -54J
1 form A
5.0
200
3.75
0.7
3.3
100
2.15
0.7
100
0.5
1.0
10
300
150
5.0
9E -14J
J: J-Lead
Test Conditions
5.0
200
3.75
0.7
±10% @ 20˚C
15˚C to 35˚C
15˚C to 35˚C
Max DC/Peak AC resistance
Max DC/Peak AC resistance
Max DC/Peak AC resistance
Max DC/Peak AC resistance
@ 1V 10mA
Max initial @ operate voltage
Max initial @ operate voltage
Insulation Resistance
Dielectric Strength
Operate Time
(Including Bounce)
Release Time
Ω Min
VDC Min
VDC Min
VDC Min
msec Max
msec Max
10¹¹
150
No shield
250
0.3
0.05
10¹¹
150
250
250
0.3
0.05
Between all isolated pins
@ 100V 20˚C 40%RH
Between contacts
Contacts to shield
Contacts / Shield to coil
@ nominal coil voltage
100Hz square wave
Diode suppression
Environmental Ratings
Measurement Reference Conditions
Temp: 15˚C to 35˚C
Humidity: 25% to 75%RH
Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C
Operate temp: -20˚C to +80˚C
Vibration: 20G’s to 2000Hz
Shock: 50G’s