85W-1A Datasheet, PDF (1/2 Pages) DB Lectro Inc – 85W 100Amp Series

High Power / Current
85W 100Amp Series
PRODUCT DESCRIPTIONS
The 85W Series attains high carry current of 100A (pulse)
at single contact. This series controls stable operation under
super high-load conditions to satisfy a broad range of industry
requirements, such as IG-BT test, FET test and DC switching
for solar system.
SPECIFICATIONS
85W 100Amp Series
Parameters
Coil Specifications
Units
Nominal Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
VDC
Ω
VDC Max
VDC Min
Contact Ratings
Switching Voltage
Switching Current
Carry Current
Carry Current (Pulse)
Contact Rating
Life Expectancy
Contact Resistance
Contact Resistance Stability
Volts
Amps
Amps
Amps
Watts
x10⁶ Cycle
mΩ
mΩ
Relay Specifications
Insulation Resistance
Ω Min
Dielectric Strength
Operate Time
(No Bounce)
Release Time
VDC Min
VDC Min
msec Max
msec Max
Environmental Ratings
85W-1A□0E0
1 Form A
12.0
35
10.2
1.2
24.0
135
20.4
2.4
240
50
50
100
3600
1000
20
2.0
10¹⁰
2500
2500
80.0
80.0
High Power / Current
Test Conditions
±10% @ 20˚C
15˚C to 35˚C
15˚C to 35˚C
Max DC/Peak AC resistance
Max DC/Peak AC resistance
Max DC/Peak AC resistance
Max DC/Peak AC resistance
Max DC/Peak AC Resist
@ 1V 10mh
Max initial @ operate voltage
Max initial @ operate voltage
Between all isolated pins
@ 100V 20˚C 40%RH
Between contacts
Contacts to coil
@ nominal coil voltage
1Hz square wave
Diode suppression
Measurement Reference Conditions
Temp: 15˚C to 35˚C
Humidity: 25% to 75%RH
Atmospheric Pressure: 860 to 1060hpa
Storage temp: -20˚C to +80˚C
Operate temp: -10˚C to +60˚C
Vibration: 20G’s to 2000Hz
Shock: 50G’s
Ordering Code:
85W-1A□0E0
□=2 (12.0VDC), 3 (24.0VDC)
125