3E-2A Datasheet, PDF (1/2 Pages) DB Lectro Inc – 3E 2FormA Series

3E 2FormA Series
Surface Mount
PRODUCT DESCRIPTIONS
In order to meet high density market demands, small package
2 Form A SMT relay was released, featured with a single coil drive.
This series achieved a small mounting area per contact, and widely
accepted by applications requiring high density tree circuit.
SPECIFICATIONS
3E 2FormA Series
Parameters
Units
Coil Specifications
Nominal Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
VDC
Ω
VDC Max
VDC Min
Contact Ratings
Switching Voltage
Switching Current
Carry Current
Contact Rating
Life Expectancy
Contact Resistance
Contact Resistance Stability
Volts
Amps
Amps
Watts
x10⁶ Cycle
mΩ
mΩ
Relay Specifications
Insulation Resistance
Ω Min
3E-2A16J 3E-2A26J
2 Form A
5.0
12.0
110
550
3.2
8.4
0.7
1.2
100
0.5
1.0
10
300
150
5.0
10¹¹
Dielectric Strength
Operate Time
(Including Bounce)
Release Time
VDC Min
VDC Min
VDC Min
msec Max
msec Max
Environmental Ratings
Measurement Reference Conditions
Temp: 15˚C to 35˚C
Humidity: 25% to 75%RH
Atmospheric Pressure: 860 to 1060hpa
200
250
250
0.5
0.5
Storage temp: -40˚C to +85˚C
Operate temp: -20˚C to +60˚C
Vibration: 20G’s to 2000Hz
Shock: 50G’s
J: J-Lead
Test Conditions
±10% @ 20˚C
15˚C to 35˚C
15˚C to 35˚C
Max DC/Peak AC resistance
Max DC/Peak AC resistance
Max DC/Peak AC resistance
Max DC/Peak AC resistance
@ 1V 10mA
Max initial @ operate voltage
Max initial @ operate voltage
Between all isolated pins
@ 100V 20˚C 40%RH
Between contacts
Contacts to shield
Contacts/Shield to coil
@ nominal coil voltage
100Hz square wave
Diode suppression