1E-14 Datasheet, PDF (1/2 Pages) DB Lectro Inc – Gull-Wing and J-Lead achieved low height

1E Low Profile Series
Miniature
Surface Mount
PRODUCT DESCRIPTIONS
Development philosophy with inherited reliability and assembly
capacity of the 1E Series was put into succesison of the 1E Low
Profile Series. Gull-Wing and J-Lead achieved low height of
3.6mm. This series is already in mass production for the ATE,
telecommunications, and other instrument markets with great
acceptance for low height and reliability.
SPECIFICATIONS
1E Low Profile Series
Parameters
Coil Specifications
Nominal Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
Contact Ratings
Units
VDC
Ω
VDC Max
VDC Min
Switching Voltage
Switching Current
Carry Current
Contact Rating
Life Expectancy
Contact Resistance
Contact Resistance Stability
Volts
Amps
Amps
Watts
x10⁶ Cycle
mΩ
mΩ
Relay Specifications
Insulation Resistance
Ω Min
Dielectric Strength
Operate Time
(Including Bounce)
Release Time
VDC Min
VDC Min
VDC Min
msec Max
msec Max
Environmental Ratings
Measurement Reference Conditions
Temp: 15˚C to 35˚C
Humidity: 25% to 75%RH
Atmospheric Pressure: 860 to 1060hpa
1E -14G-71
1E -14J-71
1 Form A
G: Gull-Wing, J: J-Lead
Test Conditions
5.0
150
3.25
0.7
±10% @ 20˚C
15˚C to 35˚C
15˚C to 35˚C
100
Max DC/Peak AC resistance
0.5
Max DC/Peak AC resistance
1.0
Max DC/Peak AC resistance
10
Max DC/Peak AC resistance
300
@ 1V 10mA
150
Max initial @ operate voltage
5.0
Max initial @ operate voltage
10¹¹
200
250
250
0.3
0.05
Between all isolated pins
@ 100V 20˚C 40%RH
Between contacts
Contacts to shield
Contacts/Shield to coil
@ nominal coil voltage
100Hz square wave
Diode suppression
Storage temp: -40˚C to +85˚C
Operate temp: -20˚C to +80˚C
Vibration: 20G’s to 2000Hz
Shock: 50G’s