1E-12G Datasheet, PDF (1/2 Pages) DB Lectro Inc – A low cost alternative to memory inspection systems.

1E-12G
Miniature Surface Mount
SPECIFICATIONS
PRODUCT DESCRIPTIONS
The 1E-12G series was specially developed as a low
cost alternative to memory inspection systems. In
order to effectively reduce costs, the number of leads
on each ground was reduced.
With proven tracks of reliability, cost performance and
manufacturing capacity, we have been providing this
series to the major memory inspection system
companies.
Axial, J-Lead also available
1E-12G
Parameters
Coil Specifications
Units
Nominal Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
VDC
Ω
VDC Max
VDC Min
Contact Ratings
Switching Voltage
Switching Current
Carry Current
Contact Rating
Life Expectancy
Contact Resistance
Contact Resistance Stability
Volts
Amps
Amps
Watts
x10⁶ Cycle
mΩ
mΩ
Relay Specifications
Insulation Resistance
Ω Min
Dielectric Strength
Operate Time
(Including Bounce)
Release Time
VDC Min
VDC Min
VDC Min
msec Max
msec Max
Environmental Ratings
Measurement Reference Conditions
Temp: 15˚C to 35˚C
Humidity: 25% to 75%RH
Atmospheric Pressure: 860 to 1060hpa
1E-12G
1 Form A
G: Gull-Wing
Test Conditions
5.0
150
3.75
0.7
±10% @ 20˚C
15˚C to 35˚C
15˚C to 35˚C
100
Max DC/Peak AC resistance
0.5
Max DC/Peak AC resistance
1.0
Max DC/Peak AC resistance
10
Max DC/Peak AC resistance
300
@ 1V 10mA
150
Max initial @ operate voltage
5.0
Max initial @ operate voltage
10¹¹
200
250
250
0.3
0.05
Between all isolated pins
@ 100V 20˚C 40%RH
Between contacts
Contacts to shield
Contacts/Shield to coil
@ nominal coil voltage
100Hz square wave
Diode suppression
Storage temp: -40˚C to +85˚C
Operate temp: -20˚C to +80˚C
Vibration: 20G’s to 2000Hz
Shock: 50G’s