|
1D-1T Datasheet, PDF (1/2 Pages) DB Lectro Inc – 5Watt Contact Rate, 50V Switching capable | |||
|
New
1D-1T Series
Miniature
Surface Mount
SPECIFICATIONS
PRODUCT DESCRIPTIONS
The 1D-1T series is Miniature Surface Mount reed relay which
achieves higher contact rate, small mounting area and high reliability
with 1FormC configuration by implementing our well-known 1FormA +
1FormB technology. The magnetic shield as standard feature reduces
magnetic interference and is suitable for high density board. Ideal
for ATE, measurement equipment and telecommunications.
- J-Lead Configuration(Axial, Gull-wing also available, please ask)
- 5Watt Contact Rate, 50V Switching capable
- 300 x 10 6 cycle
1D-1T Series
Parameters
Coil Specifications
Units
Nominal Coil Voltage
MAX Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
VDC
VDC
â¦
VDC Max
VDC Min
Contact Ratings
Switching Voltage
Switching Current
Carry Current
Contact Rating
Life Expectancy
Contact Resistance
Contact Resistance Stability
Volts
Amps
Amps
Watts
x106 Cycle
mâ¦
mâ¦
Relay Specifications
1D-1T13J 1D-1T23J
1 Form C
5.0
5.5
110
3.75
0.7
12.0
13.2
550
8.4
1.2
50
0.2
0.75
5
300
150
5.0
Insulation Resistance
⦠Min
1011
Dielectric Strength
VDC Min
150
VDC Min
500
VDC Min
500
Operate Time
msec Max
0.5
(Including Bounce)
Release Time
msec Max
0.5
Environmental Ratings
Measurement Reference Conditions
Temp: 15ËC to 35ËC
Humidity: 25% to 75%RH
Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40ËC to +85ËC
Operate temp: -20ËC to +80ËC
Vibration: 20Gâs to 2000Hz
Shock: 50Gâs
J: J-Lead
Test Conditions
±10% @ 20ËC
@ 20ËC
@ 20ËC
Max DC/Peak AC resistance
Max DC/Peak AC resistance
Max DC/Peak AC resist(@30ËC)
Max DC/Peak AC resistance
@ 1V 10mA
Max initial @ operate voltage
Max initial @ operate voltage
Between all isolated pins
@ 100V 20ËC 40%RH
Between contacts
Contacts to shield
Contacts/Shield to coil
@ nominal coil voltage
100Hz square wave
Diode Suppression
|
▷ |