17E-1A Datasheet, PDF (1/2 Pages) DB Lectro Inc – 17E Series is one of the Sanyu 30 Watt SMT relays

17E Series
Surface Mount
PRODUCT DESCRIPTIONS
The 17E Series is one of the Sanyu 30 Watt SMT relays,
featuring 50 impedance and high dielectric strength in small
form factor. This series has been widely accepted by the ATE,
telecommunications, and instrument markets.
SPECIFICTIONS
17E Series
Parameters
Coil Specifications
Nominal Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
Contact Ratings
Switching Voltage
Switching Current
Carry Current
Contact Rating
Life Expectancy
Contact Resistance
Contact Resistance Stability
Relay Specifications
Insulation Resistance
Units
VDC
Ω
VDC Max
VDC Min
Volts
Amps
Amps
Watts
x10⁶ Cycle
mΩ
mΩ
Ω Min
Dielectric Strength
Operate Time
(Including Bounce)
Release Time
VDC Min
VDC Min
VDC Min
msec Max
msec Max
Environmental Ratings
Measurement Reference Conditions
Temp: 15˚C to 35˚C
Humidity: 25% to 75%RH
Atmospheric Pressure: 860 to 1060hpa
Ordering code:
17E-1A□2G/J-01
□=1 (5.0VDC), 2 (12.0VDC)
17E-1A□2G-01
17E-1A□2J-01
1 Form A
5.0
12.0
200
825
3.3
8.1
0.7
1.2
200
0.5
1.3
30
1000
150
5.0
10¹²
300
1500
1500
0.4
0.2
G: Gull-Wing, J: J-Lead
Test Conditions
±10% @ 20˚C
15˚C to 35˚C
15˚C to 35˚C
Max DC/Peak AC resistance
Max DC/Peak AC resistance
Max DC/Peak AC resistance
Max DC/Peak AC resistance
@ 1V 10mA
Max initial @ operate voltage
Max initial @ operate voltage
Between all isolated pins
@ 100V 20˚C 40%RH
Between contacts
Contacts to shield
Contacts/Shield to coil
@ nominal coil voltage
100Hz square wave
Diode Suppression
Storage temp: -40˚C to +85˚C
Operate temp: -20˚C to +80˚C
Vibration: 20G’s to 2000Hz
Shock: 50G’s