DM9000BIEP Datasheet, PDF (1/2 Pages) Davicom Semiconductor, Inc. – Ethernet Controller with General Processor Interface

DM9000BIEP Product Brief
Ethernet Controller with General Processor Interface
November 2008 Rev.1.0
The DM9000BI is a fully integrated and cost-effective low pin count single chip
Fast Ethernet controller with a general processor interface, Supports Industrial-grade:
-40℃.~ +85℃, a 10/100M PHY and 4K Dword SRAM. It is designed with low
power and high performance process interface that support 3.3V with 5V IO
tolerance.
The DM9000BI supports 8-bit and 16-bit data interfaces to internal memory accesses
for various processors. The PHY of the DM9000BI can interface to the UTP3, 4, 5 in
10Base-T and UTP5 in 100Base-TX with
HP Auto-MDIX. It is fully compliant with the IEEE 802.3u Spec. Its auto-negotiation
function will automatically configure the DM9000BI to take the maximum advantage
of its abilities. The DM9000BI also supports IEEE 802.3x full- duplex flow control.
Block Diagram
LED
EEPROM
Interface
TX+/-
RX+/-
PHYceiver
100 Base-TX
transceiver
100 Base-TX
PCS
AUTO-MDIX
10 Base-T
Tx/Rx
MAC
MII
TX Machine
Control
&Status
Registers
RX Machine
Autonegotiation
MII Management
Control
& MII Register
Memory
Management
Internal
SRAM