DR354-0_14 Datasheet, PDF (2/2 Pages) Datatronic Distribution, Inc. – SMD INDUCTOR DR354-0 SERIES

MECHANICAL OUTLINES
.64 MAX
.66 MAX
1.19 MAX
.51
.25
2X .66
2X .36
.46
SUGGESTED
PAD LAYOUT
SCHEMATIC
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance 0.3mm, unless other specified
3. Tape and reel quantity, 8000 pcs/reel
4. For non-RoHS parts replace DR prefix with 42- (e.g. DR354-0 becomes 42-354-0)
5. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020D
August 24, 2009
2X .23
.56
DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: [phone] Fax: [phone] Email: [e-mail]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: [phone]
All specifications are subject to change without notice Page 2 0f 2