DR340-5_14 Datasheet, PDF (2/2 Pages) Datatronic Distribution, Inc. – SHIELDED POWER INDUCTOR DR340-5 SERIES

November 8, 2011
SHIELDED POWER INDUCTOR DR340-5 SERIES
MECHANICAL OUTLINES
.287
7,30
1
XXX
2
.070
1,80
.287
.177 Max.
7,30
4,50
.196
5,00
.315
.188
1
8,00
4,80
2
SCHEMATIC
.086
2,20
NOTES:
1. Dimensions are shown in inches/millimeters
2. Unless otherwise specified, tolerance = Inches: ±0.012
= Millimeters: ±0,30
3. IDC MAX based on the inductance being 75% of its initial value
4. Tape & reel quantity, 500 pcs/reel
5. Terminal finish is compliant to RoHS requirements
6. Solder in accordance with J-STD-002 Rev. D
7. Non-RoHS series parts 42-340-5-XXX are finished with leaded solder Sn60Pb40 or equivalent
DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: [phone] Fax: [phone] Email: [e-mail]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: [phone]
All specifications are subject to change without notice. Page 2 of 2