DR340-3-132 Datasheet, PDF (2/2 Pages) Datatronic Distribution, Inc. – SHIELDED POWER INDUCTOR

February 28, 2007
SHIELDED POWER INDUCTOR DR340-3 SERIES
MECHANICAL OUTLINE
.472
12,00
1
XXX
2
.472
12,00
.197
5,00
.236 Max.
6,00
1
2
SCHEMATIC
.504
12,80
.311
7,90
.275
7,00
.212
5,40
NOTES:
1. All dimensions are shown in inches/millimeters
2. Unless otherwise specified, tolerance = Inches: ±0.012
= Millimeters: ±0,30
3. IDC MAX based on the inductance being 75% of its initial value
4. Tape & reel quantity, 500 pcs/reel
5. For non-RoHS parts replace the DR prefix with 42- (e.g. DR340-3 becomes 42-340-3)
6. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020
7. Inductance tolerance values: 1.3µH – 7.5µH = +30% / -20%
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: [phone] Toll Free Tel: [phone] Fax: [phone]
Email: [e-mail]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: [phone]
All specifications are subject to change without notice. Page 2 of 2