DR331-7_14 Datasheet, PDF (2/2 Pages) Datatronic Distribution, Inc. – SHIELDED SMD INDUCTOR DR331-7 SERIES

October 28, 2011
SHIELDED SMD INDUCTOR DR331-7 SERIES
MECHANICAL SPECIFICATIONS
.175 MAX.
4,45
1 ^XXX 2
.260 MAX.
6,60
1
2
SCHEMATIC
.115 MAX.
2,92
.050
1,27
.170
4,32
.055
.140
1,40
3,56
.160
4,06
SUGGESTED PAD LAYOUT
NOTES:
1. Dimensions are shown in inches/millimeters
Unless otherwise specified, tolerance
= Inches: ±0.010
= Millimeters: ±0,30
2. Isat based on the inductance being 90% of its initial value
3. Irms based on temperature rise of 40°C
4. Tape & Reel Packaging, 2000 pcs / reel.
5. Inductance tested at 0.1 Vrms @ 100 kHz.
6. Terminal finish is compliant to RoHS requirements and is gold plated, nominal thickness of 15 micro inches.
7. Solder in accordance with J-STD-002 Rev. D
8. Non-RoHS series parts 42-331-7-XXX are finished with leaded solder Sn60Pb40 or equivalent
DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: [phone] Fax: [phone] Email: [e-mail]
499 King’s Road, Hong Kong Tel: [phone] Fax: [phone]
All specification are subject to change without notice.