DR331-7-102 Datasheet, PDF (2/2 Pages) Datatronic Distribution, Inc. – SHIELDED SMD INDUCTOR

SHIELDED SMD INDUCTOR DR331-7 SERIES
MECHANICAL SPECIFICATIONS
.175 MAX.
4,45
1 ^XXX 2
.260 MAX.
6,60
1
2
SCHEMATIC
.115 MAX.
2,92
.050
1,27
.170
4,32
.055
.140
1,40
3,56
.160
4,06
SUGGESTED PAD LAYOUT
NOTES:
1. Dimensions are shown in inches/millimeters
Unless otherwise specified, tolerance
= Inches: ±0.010
= Millimeters: ±0,30
2. Isat based on the inductance being 90% of its initial value
3. Irms based on temperature rise of 40°C
4. Tape & Reel Packaging, 2000 pcs / reel.
5. Inductance tested at 0.1 Vrms @ 100 kHz For non-RoHS parts replace DR prefix with 42- (e.g. DR331-7 becomes 42-331-7)
6. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: [phone] Toll Free Tel: [phone] Fax: [phone]
Email: [e-mail]
499 King’s Road, Hong Kong Tel: [phone] Fax: [phone]
All specification are subject to change without notice.
Page 2 of 2