|
DR357-4-103 Datasheet, PDF (1/1 Pages) Datatronic Distribution, Inc. – SHIELDED SMD INDUCTOR | |||
|
SHIELDED SMD INDUCTOR DR357-4 SERIES
Features
z Low Profile Surface Mount Design
z Flat Top for Pick and Place
z Inductance Range from 10.0µH to 1000.0µH
z Operating Temp. -30°C to +80°C
z Tinned Leads with Leaded Solder is Available (note 7)
ELECTRICAL SPECIFICATIONS AT 25ºC
Part No.
DR357-4-103
DR357-4-123
DR357-4-153
DR357-4-183
DR357-4-223
DR357-4-273
DR357-4-333
DR357-4-393
DR357-4-473
DR357-4-563
DR357-4-683
DR357-4-823
DR357-4-104
DR357-4-124
DR357-4-154
DR357-4-184
DR357-4-224
DR357-4-274
DR357-4-334
DR357-4-394
DR357-4-474
DR357-4-564
DR357-4-684
DR357-4-824
DR357-4-105
Inductance
(µH) ± 30%
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
120.0
150.0
180.0
220.0
270.0
330.0
390.0
470.0
560.0
680.0
820.0
1000.0
MECHANICAL OUTLINES
DCR
(â¦) Max.
0.026
0.032
0.040
0.046
0.059
0.065
0.081
0.103
0.122
0.145
0.193
0.219
0.247
0.298
0.355
0.393
0.484
0.633
0.780
0.958
1.220
1.352
1.519
1.694
1.946
February 15, 2007
I rated
(A) Max.
3.45
3.40
2.83
2.62
2.44
2.24
1.88
1.70
1.56
1.39
1.36
1.20
1.09
1.00
0.91
0.84
0.75
0.68
0.60
0.57
0.50
0.47
0.43
0.39
0.35
Notes:
1. All dimensions are shown in millimeter âmmâ
2. General tolerance ±0.2mm, unless other specified
3. Inductance Test: 100kHz, 0.1Vrms
4. Irated for an approximate 40°C temperature rise
5. Irated for an approximate 35% drop maximum of the initial value
6. Tape and reel quantity, 2000 pcs/reel
7. For non-RoHS parts, replace DR prefix with 42- (e.g. DR357-4 becomes 42-357-4)
8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701
Email: ddisales@datatronics.com
499 Kingâs Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.
|