DR352-2 Datasheet, PDF (1/1 Pages) Datatronic Distribution, Inc. – SMD INDUCTOR

March 6, 2007
SMD INDUCTOR DR352-2 SERIES
Features
z Surface Mount Beads
z Operating Temp. -20°C to +80°C
z Tinned Leads with Leaded Solder is Available (note 6)
z Custom Impedance Values Available
ELECTRICAL SPECIFICATIONS AT 25ºC
IMPEDANCE (Ω)
25MHz
100MHz
50
76
MECHANICAL OUTLINES
R_DC
(mΩ)
0.90
I_RATED MAX
(A)
0.50
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance ±0.2mm, unless other specified
3. I_rms for an approximate 45°C temperature rise
4. I_sat for an approximate 20% drop maximum of the nominal value
5. Tape and reel quantity, 2000 pcs/reel
6. For non-RoHS parts replace DR prefix with 42- (e.g. DR352-2 becomes 42-352-2)
7. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C
DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: [phone] Toll Free Tel: [phone] Fax: [phone]
Email: [e-mail]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: [phone]
All specifications are subject to change without notice.