DR345-090 Datasheet, PDF (1/1 Pages) Datatronic Distribution, Inc. – SELF-LEADED SMD INDUCTOR

March 1, 2007
SELF-LEADED SMD INDUCTOR DR345 SERIES
Features
z Low Profile Surface Mount Design
z Flat Top for Pick and Place
z Inductance Range from 9.0 µH to 1100µH
z Tape & Reel Packing
z Operating Temp. -40°C to +85°C)
z Tinned Leads with Leaded Solder is Available (note 3)
ELECTRICAL SPECIFICATIONS AT 25ºC
PART No.
DR345-090
DR345-160
DR345-500
DR345-112
INDUCTANCE (µH)
±20% @100KHz, 0.1V
9
16
50
1100
DCR (Ω)
±20%
0.016
0.030
0.115
1.480
RATED CURRENT
(A) Nominal
7.2
5.1
2.6
0.71
MECHANICAL OUTLINES
17.02
[0.670]
10.00 Max.
[0.394 Max.]
ETop @100KHz
(V-µSec) Ref.
4.92
6.27
10.5
54.4
17.78
[0.700]
DR345
DATE
FRONT VIEW
19.56
[0.770]
2.00
[0.079]
SIDE VIEW
14.73
[0.580]
PCB SOLDER PAD LAYOUT(REF.)
14.73
[0.580]
BOTTOM VIEW
1
2
SCHEMATIC
NOTES:
1. All dimensions are shown in millimeters “mm” [inches “in”].
2. General tolerance ±0.25mm [0.010 in.], unless otherwise specified.
3. For non-RoHS parts replace DR prefix with 42- (e.g. DR345 becomes 42-345).
4. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C.
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: [phone] Toll Free Tel: [phone] Fax: [phone]
Email: [e-mail]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: [phone]
All specifications are subject to change without notice.