3D2700 Datasheet, PDF (2/2 Pages) Data Delay Devices, Inc. – 7-BIT ADJUSTABLE, HIGH B.W. PASSIVE DELAY LINE

3D2700
PASSIVE DELAY LINE TEST SPECIFICATIONS
TEST CONDITIONS
INPUT:
Ambient Temperature:
Input Pulse:
Source Impedance:
Rise/Fall Time:
Pulse Width:
Period:
25^oC  3^oC
High = +0.5V typical
Low = -0.5V typical
50 Max.
3.0 ns Max. (measured
at 10% and 90% levels)
PW_IN = 100ns
PER_IN = 1000ns
OUTPUT:
R_load:
C_load:
Threshold:
10M
10pf
50% (Rising & Falling)
NOTE: The above conditions are for test only and do not in any way restrict the operation of the device.
PULSE
GENERATOR
OUT
TRIG
RIN
50 
IN DEVICE UNDER OUT
TEST (DUT)
RIN = ROUT = ZLINE
ROUT
IN
TRIG
OSCILLOSCOP
E
Test Setup (Delay Measurements)
OUT
IN R
IN A
NETWORK
ANALYZER
(HP 3577A)
IN B
RF
Coax
Coax
50-OHM
IN
SIGNAL
DIVIDER
OUT R (HP 35676
-66301)
OUT A
OUT B
Coax
Coax
Test Setup (Frequency Response)
IMPEDANCE
MATCHING
NETWORK
IMPEDANCE
MATCHING
NETWORK
IN
GND
DEVICE
UNDER
TEST
OUT
GND
Doc #14022
DATA DELAY DEVICES, INC.
2
1/5/2015
Tel: [phone] Fax: [phone] http://www.datadelay.com