1518 Datasheet, PDF (2/2 Pages) Data Delay Devices, Inc. – 5-TAP SMD DELAY LINE TD/TR = 3

1518
PASSIVE DELAY LINE TEST SPECIFICATIONS
TEST CONDITIONS
INPUT:
Ambient Temperature: 25^oC ± 3^oC
Input Pulse:
High = 3.0V typical
Low = 0.0V typical
Source Impedance:
50Ω Max.
Rise/Fall Time:
3.0 ns Max. (measured
at 10% and 90% levels)
Pulse Width (T_D <= 75ns): PW_IN = 100ns
Period
(T_D <= 75ns): PER_IN = 1000ns
Pulse Width (T_D > 75ns): PW_IN = 2 x T_D
Period
(T_D > 75ns): PER_IN = 10 x T_D
OUTPUT:
R_load:
C_load:
Threshold:
10MΩ
10pf
50% (Rising & Falling)
NOTE: The above conditions are for test only and do not in any way restrict the operation of the device.
INPUT
SIGNAL
OUTPUT
SIGNAL
T_RISE
PW_IN
PER_IN
T_FALL
90%
V_IH
90%
50%
10%
50%
10%
V_IL
T_RISE
T_RISE
T_FALL
90%
50%
10%
V_OH
90%
50%
10%
T_FALL
V_OL
Timing Diagram For Testing
PULSE
GENERATOR
OUT
TRIG
RIN
50 Ω
IN
T1
T2
DEVICE UNDER T3
TEST (DUT) _T4
T5
IN
TRIG
OSCILLOSCOPE
RIN = ROUT = ZLINE
ROUT
Test Setup
Doc #97030
DATA DELAY DEVICES, INC.
2
2/7/97
Tel: [phone] Fax: [phone] http://www.datadelay.com