English
Language : 

DS1220AB_10 Datasheet, PDF (7/8 Pages) Dallas Semiconductor – 16k Nonvolatile SRAM
DS1220AB/AD
8. If WE is low or the WE low transition occurs prior to or simultaneously with the CE low transition,
the output buffers remain in a high-impedance state during this period.
9. Each DS1220AB and each DS1220AD has a built-in switch that disconnects the lithium source until
VCC is first applied by the user. The expected tDR is defined as accumulative time in the absence of
VCC starting from the time power is first applied by the user. This parameter is guaranteed by design
and is not 100% tested.
10. All AC and DC electrical characteristics are valid over the full operating temperature range. For
commercial products, this range is 0°C to 70°C. For industrial products (IND), this range is -40°C to
+85°C.
11. In a power down condition the voltage on any pin may not exceed the voltage on VCC.
12. tWR1 , tDH1 are measured from WE going high.
13. tWR2 , tDH2 are measured from CE going high.
14. DS1220 modules are recognized by Underwriters Laboratories (UL) under file E99151.
DC TEST CONDITIONS
Outputs Open
Cycle = 200ns for Operating Current
All Voltages Are Referenced to Ground
AC TEST CONDITIONS
Output Load: 100 pF + 1TTL Gate
Input Pulse Levels: 0 - 3.0V
Timing Measurement Reference Levels
Input: 1.5V
Output: 1.5V
Input Pulse Rise and Fall Times: 5ns
ORDERING INFORMATION
PART
TEMP RANGE
DS1220AB-100+
0°C to +70°C
DS1220AB-100IND+
-40°C to +85°C
DS1220AD-100+
0°C to +70°C
DS1220AD-100IND+
-40°C to +85°C
+Denotes a lead(Pb)-free/RoHS-compliant package.
SUPPLY
TOLERANCE
5V ± 5%
5V ± 5%
5V ± 10%
5V ± 10%
PIN-PACKAGE
24 720 EDIP
24 720 EDIP
24 720 EDIP
24 720 EDIP
PACKAGE INFORMATION
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note
that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a
different suffix character, but the drawing pertains to the package regardless of RoHS status.
PACKAGE TYPE
PACKAGE CODE
OUTLINE NO.
LAND
PATTERN NO.
24 EDIP
MDT24+1
21-0245

7 of 8