DS1035 Datasheet, PDF (3/6 Pages) Dallas Semiconductor – 3-in-1 High.Speed Silicon Delay Line

DS1035
TEST SETUP DESCRIPTION
Figure 2 illustrates the hardware configuration used for measuring the timing parameters of the DS1035.
The input waveform is produced by a precision pulse generator under software control. Time delays are
measured by a time interval counter (20 ps resolution ) connected to the output. The DS1035 output taps
are selected and connected to the interval counter by a VHF switch control unit. All measurements are
fully automated with each instrument controlled by the computer over an IEEE 488 bus.
DS1035 TEST CIRCUIT Figure 2
3 of 6