DS9100 Datasheet, PDF (2/2 Pages) Dallas Semiconductor – Touch and Hold Probe Stampings

PRINTED CIRCUIT BOARD LAYOUTS
DS9100
Compatible PCB layout.
Good for either center part DS9100B or DS9100C
Center piece optimized for cantilever DS9100B
Additional diminsions for ground contact.
CENTER-DATA
OUTER RING-GROUND
COPPER CLADDING>0.3 kg/m² or > 34 µm
(>1 oz/sq. ft)
Center piece optimized for coiled spring DS9100C
Dimensions are in millimeters.
The DS9100 stampings are mounted on Side A of the
printed circuit board.
2 of 2
102199