English
Language : 

DS1802 Datasheet, PDF (16/17 Pages) Dallas Semiconductor – Dual Audio Taper Potentiometer With Pushbutton Control
DS1802
7. Tap-to-tap tolerance is used to determine the change in voltage between successive tap positions. The
DS1802 is specified for ±0.25 dB tap-to-tap tolerance.
8. Typical values are for tA =25°C and nominal supply voltage.
9. Power-up time is the time for all pushbutton inputs to be stable and active once power has reached a
valid level, 2.7V min.
10. See Figure 6.
11. Absolute tolerance is used to determine measured wiper voltage vs. expected wiper voltage as
determined by wiper position. The DS1802 is bounded by a ±1 dB absolute tolerance.
12. Maximum current specifications are based on clock rate, active zero-crossing detection, and
pushbutton activation. See Figure 8 for clock rate vs. current specification.
13. Valid for VCC =3V or 5V.
14. See Figure 10.
15. Standby current levels apply when all inputs are driven to appropriate supply levels.
16. These parameters are characterized and not 100% tested.
17. Valid at 25°C only.
DIGITAL OUTPUT LOAD Figure 9
16 of 17
101999