|
DS2114 Datasheet, PDF (1/6 Pages) Dallas Semiconductor – SCSI Terminator | |||
|
DS2114
DS2114
SCSI Terminator
FEATURES
⢠Fully compliant with SCSI, SCSIâ2 and SCSIâ3 stan-
dards
⢠Provides active termination for nine signal lines
⢠Laserâtrimmed 110 ohms termination resistors have
2% tolerance
⢠Low dropout voltage regulator
⢠Fully supports actively negated SCSI signals
⢠Onboard thermal shutdown circuitry
⢠Narrow 16âpin plastic SOIC (DS2114Z)
PIN ASSIGNMENT
TERMPWR1
1
R1
2
16
NC
15
VREF2
R2
3
14
R9
R3
4
13
R8
R4
5
12
R7
R5
6
11
R6
VREF1
7
10
NC
GND
8
9
TERMPWR2
DS2114Z 16âPIN SOIC (150 MIL)
DESCRIPTION
The SCSIâ2 and SCSIâ3 standards recommend the
use of active terminations at both ends of every cable
segment in a SCSI system with singleâended drivers
and receivers. The DS2114 SCSI Terminator, which is
fully compliant with these standards, enables the de-
signer to gain the benefits of active termination: greater
immunity to voltage drops on the TERMPWR (TER-
Mination PoWeR) line, enhanced highâlevel noise im-
munity, intrinsic TERMPWR decoupling, and very low
quiescent current consumption. The DS2114 integrates
a regulator and nine precise 110 ohms termination re-
sistors into a monolithic IC. The DS2114 is intended for
cable end terminator assemblies and devices where the
terminators do not need to be isolated from the SCSI
bus.
070198 1/6
|
▷ |