DS1803 Datasheet, PDF (1/11 Pages) Dallas Semiconductor – Addressable Dual Digital Potentiometer

DS1803
Addressable Dual Digital Potentiometer
www.dalsemi.com
FEATURES
§ 3V or 5V Power Supplies
§ Ultra-low power consumption
§ Two digitally controlled, 256-position
potentiometers
§ 14-Pin TSSOP (173 mil) and 16-Pin SOIC
(150 mil) packaging available for surface
mount applications
§ Addressable using 3-Chip Select Inputs
§ Serial/Synchronous Bus Inputs
§ Operating Temperature Range:
- Industrial: -40°C to +85°C
§ Standard Resistance Values:
- DS1803-010 10kΩ
- DS1803-050 50kΩ
- DS1803-100 100kΩ
PIN DESCRIPTION
L0, L1
- Low End of Resistor
H0, H1
- High End of Resistor
W0,W1
- Wiper terminal of Resistor
V_CC
A0..A2
- 3V/5V Power Supply Input
- Chip Select Inputs
SDA
- Serial Data I/O
SCL
- Serial Clock Input
GND
- Ground
NC
- No connection
PIN ASSIGNMENT
H1 1
L1 2
W1 3
A2 4
A1 5
A0 6
GND 7
14 VCC
13 NC
12 H0
11 L0
10 W0
9 SDA
8 SCL
DS1803 14-PIN TSSOP (173 MIL)
H1 1
NC 2
L1 3
W1 4
A2 5
A1 6
A0 7
GND 8
16 VCC
15 NC
14 H0
13 L0
12 W0
11 NC
10 SDA
9 SCL
DS1803Z 16-PIN SOIC (150 MIL)
DS1803 16-PIN DIP (300 MIL)
See mech. Drawings Section
DESCRIPTION
The DS1803 Addressable Dual Digital Potentiometer is an addressable device having two independently
controlled potentiometers. Each potentiometer’s wiper can be set to one of 256 positions. Device control
is achieved via a 2-wire serial interface having a data I/O terminal and a clock input terminal. Device
addressing is provided through three chip select input terminals and correct communication protocol.
Addressing capability, when operating in a bus topology, allows up to eight devices to be controlled by
the serial interface. The exact wiper position of each potentiometer can be written or read. The DS1803
is available in a 16-pin DIP, 16-pin SOIC and 14-pin TSSOP package. The device is available in three
standard resistance values: 10kΩ , 50kΩ , and 100kΩ , and is specified over the industrial temperature
range.
1 of 11
101599