KBJ2A Datasheet, PDF (1/2 Pages) Won-Top Electronics – 2.0A BRIDGE RECTIFIER

KBJ2A THRU KBJ2M
Features
· Glass Passivated Die Construction
· High Case Dielectric Strength
· Low Reverse Leakage Current
· High s urge current capability
· Ideal for Printed Circuit Board Applications
· Plastic Material - UL Flammability Classification 94V-0
CURRENT 4.0 Amperes
VOLTAGE 50 to 1000 Volts
0.125 (3.17)
x 45 degrees
C hamfer
0.080 (2.03)
0.060 (1.50)
0.825 (20.9)
0.815 (20.7)
0.421 (10.7)
0.411 (10.4)
Mechanical Data
C as e: Molded plas tic body over pas s ivated junctions
Terminals : P lated leads s olderable per MIL-S T D-750,
Method 2026
High temperature s oldering guaranteed:
260 /10 s econds , 0.375" (9.5mm) lead length,
5lbs. (2.3kg) tens ion
Mounting Pos ition: Any
Weight: 0.071 oz., 2.0 g
P ackaging c odes /options :
1/400 E A. per B ulk Tray S tack
Maximum Ratings And Electrical Characteristics
0.095 (2.41)
0.080 (2.03)
0.098 (2.5)
0.075 (1.9)
0.050 (1.27)
0.040 (1.02)
0.098 (2.5)
0.075 (1.9)
0.718 (18.2)
0.682 (17.3)
Lead Depth
0.022 (0.56)
0.018 (0.46)
0.040 (1.02)
0.030 (0.76)
0.210 (5.3)
0.190 (4.8)
0.022 (0.56)
0.018 (0.46)
0.140 (3.56)
0.128 (3.25)
P olarity shown on front side of case, positive lead beveled corner.
Dimensions in inches and (millimeters)
(Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive
load. For capacitive load, derate by 20%)
Symbols
KBJ
2A
KBJ
2B
KBJ
2C
KBJ KBJ
2G 2J
KBJ
2K
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRMM
VRWM
VR
50
100
200 400 600
800
RMS Reverse voltage
Ma ximum a vera ge forwa rd @ T C =50
R ectified output current a t @ T A=40
Non-Repetitive Peak Forward Surge Current,
8.3ms single half-sine-wave superimposed
on rated load per element (JEDEC method)
Forward Voltage (per element)
@ IF=4.0 A
VR(RMS)
35
Io
IFSM
VFM
70
140
280
420
560
4.0
3.0
150
1.0
Peak Reverse Current at Rated
DC Blocking Voltage
@ TC=25
@ TC=125
IRM
5.0
500
Typical Junction Capacitance (Note 1)
Cj
40
KBJ
2M
1000
700
Units
Volts
Volts
Amps
Amps
Volts
A
pF
Typical Thermal Resistance,
Junction to Case (Note 2)
R JC
22
/W
Operating and Storage Temperature Range
Tj
TSTG
-55 to +150
Notes:
(1) Thermal resistance from junction to case per element. Unit mounted on 300 x 300 x 16mm aluminum plate heat sink.
(2) Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC.