1N53 Datasheet, PDF (1/2 Pages) Advanced Semiconductor – SILICON MIXER DIODE

1N5391 THRU 1N5399
Features
· The plastic package carries Underwrites Laboratory
Flammability Classification 94V-0
· Construction utilizes void-free molded plastic technique
· High surge current capability
· 1.5A operation at TL=70 with no thermal runaway
· Low reverse leakage
· High forward surge current capability
· High temperature soldering guaranteed : 250 /10 seconds,
0.375"(9.5mm) lead length, 5lbs.(2.3kg) tension
Mechanical Data
· Case : JEDEC DO-15 molded plastic body
· Terminals : Lead solderable per MIL-STD-750,
method 2026
· Polarity : Color band denotes cathode end
· Mounting Position : Any
· Weight : 0.014 ounce, 0.33 gram
CURRENT 1.5 Amperes
VOLTAGE 50 to 1000 Volts
DO-15
0.140(3.6)
0.104(2.6)
DIA.
1.0(25.4)
MIN.
0.300(7.6)
0.230(5.8)
0.034(0.9)
0.028(0.7)
DIA.
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
Maximum Ratings And Electrical Characteristics
(Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive
load. For capacitive load, derate by 20%)
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Symbols
VRRM
VRMS
VDC
1N 1N 1N 1N 1N 1N 1N 1N 1N
5391 5392 5393 5394 5395 5396 5397 5398 5399
50 100 200 300 400 500 600 800 1000
35 70 140 210 280 350 420 560 700
50 100 200 300 400 500 600 800 1000
Maximum average forward rectified current
0.375"(9.5mm) lead length TA=70
I(AV)
1.5
Peak forward surge current 8.3ms half sine
wave superimposed on rated load
IFSM
50.0
(JEDEC method) at TA=70
Maximum instantaneous forward voltage
at 1.5A
VF
1.4
Maximum reverse current
TA=25
at rated DC blocking voltage _TA=100
Typical thermal resistance (Note 2)
Typical junction capacitance (Note 1)
Maximum DC Blocking Voltage Temperature
Operating and Storage temperature Range
IR
R JA
R JL
CJ
TA
TJ
TSTG
5.0
50.0
50.0
25.0
20.0
+150.0
-65 to +175
Notes:
(1) Measured at 1MHz and applied reverse voltage of 4.0V DC.
(2) Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length, P.C.B. mounted
Units
Volts
Volts
Volts
Amps
Amps
Volts
A
/W
pF