1N4942G Datasheet, PDF (1/2 Pages) Rectron Semiconductor – FAST RECOVERY GLASS PASSIVATED RECTIFIER

1N4942G THRU 1N4948G
Features
· Fast switching
· Low leakage current
· Low forward voltage drop
· High current capability
· Glass passivated junction
· High reliability capability
CURRENT 1.0 Ampere
VOLTAGE 200 to 1000 Volts
DO-41
0.107(2.7)
0.080(2.0)
DIA.
1.0(25.4)
MIN.
Mechanical Data
· Case : JEDEC DO-41 molded plastic body
· Terminals : Plated axial lead solderable per MIL-STD-750,
method 2026
· Polarity : Color band denotes cathode end
· Mounting Position : Any
· Weight : 0.012 ounce, 0.34 gram
0.205(5.2)
0.166(4.2)
0.034(0.9)
0.028(0.7)
DIA.
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
Maximum Ratings And Electrical Characteristics
(Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive
load. For capacitive load, derate by 20%)
Symbols 1N4942G 1N4944G 1N4946G 1N4947G 1N4948G
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375"(9.5mm) lead length at TA=55
Peak forward surge current 8.3ms single
half sine-wave superimposed on rated load
(JEDEC method)
Maximum instantaneous forward voltage
at 1.0A
VRRM
VRMS
VDC
I(AV)
IFSM
VF
200
400
600
800
1000
140
280
420
560
700
200
400
600
800
1000
1.0
30.0
1.3
Maximum DC reverse current at rated DC
blocking voltage
5.0
IR
Maximum full load reverse current full cycle
average. 0.375"(9.5mm) lead length at
100
TL=55
Maximum reverse recovery time (Note 1)
Trr
150
250
500
Typical junction capacitance (Note 2)
CJ
15.0
Operating junction and storage
TJ
temperature range
TSTG
-65 to +175
Notes:
(1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A.
(2) Measured at 1MHz and applied reverse voltage of 4.0 Volts.
Units
Volts
Volts
Volts
Amp
Amps
Volts
A
ns
pF