1N4933G Datasheet, PDF (1/2 Pages) Rectron Semiconductor – FAST RECOVERY GLASS PASSIVATED RECTIFIER

1N4933G THRU 1N4937G
Features
· Fast switching
· Low leakage current
· Low forward voltage drop
· High current capability
· Glass passivated junction
· High reliability capability
CURRENT 1.0 Ampere
VOLTAGE 50 to 600 Volts
DO-41
0.107(2.7)
0.080(2.0)
DIA.
1.0(25.4)
MIN.
Mechanical Data
· Case : JEDEC DO-41 molded plastic body
· Terminals : Plated axial lead solderable per MIL-STD-750,
method 2026
· Polarity : Color band denotes cathode end
· Mounting Position : Any
· Weight : 0.012 ounce, 0.34 gram
0.205(5.2)
0.166(4.2)
0.034(0.9)
0.028(0.7)
DIA.
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
Maximum Ratings And Electrical Characteristics
(Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive
load. For capacitive load, derate by 20%)
Symbols 1N4933G 1N4934G 1N4935G 1N4936G 1N4937G
Maximum recurrent peak reverse voltage
Maximum RMS voltage
VRRM
50
100
200
400
600
VRMS
35
70
140
280
420
Maximum DC blocking voltage
VDC
50
100
200
400
600
Maximum average forward rectified current
0.375"(9.5mm) lead length at TA=75
I(AV)
1.0
Peak forward surge current 8.3ms single
half sine-wave superimposed on rated load
IFSM
30.0
(JEDEC method) at TA=55
Maximum instantaneous forward voltage
at 1.0A
VF
1.2
Maximum DC reverse current at rated DC
blocking voltage
IR
Maximum full load reverse current full cycle
average. 0.375"(9.5mm) lead length at
TL=55
Maximum reverse recovery time (Note 1)
Trr
Typical junction capacitance (Note 2)
CJ
Operating junction and storage
TJ
temperature range
TSTG
5.0
100
150
15.0
-65 to +175
Notes:
(1) Test conditions: IF=1.0A, VR=30V
(2) Measured at 1MHz and applied reverse voltage of 4.0 Volts.
Units
Volts
Volts
Volts
Amp
Amps
Volts
A
ns
pF