1N4933 Datasheet, PDF (1/2 Pages) Motorola, Inc – FAST RECOVERY RECTIFIERS 50-600 VOLTS 1.0 AMPERE

1N4933 THRU 1N4937
Features
· Plastic package has Underwrites Laboratory Flammability
Classification 94V-0
· Fast switching speed
· Construction utilizes void-free molded plastic technique
· 1.0A operation at TA=75 with to terminal runaway
· High temperature soldering guaranteed : 250 /10 seconds,
0.375"(9.5mm) lead length, 5 lbs.(2.3kg) tension.
CURRENT 1.0 Ampere
VOLTAGE 50 to 600 Volts
DO-41
0.107(2.7)
0.080(2.0)
DIA.
1.0(25.4)
MIN.
Mechanical Data
· Case : JEDEC DO-41 molded plastic body
· Terminals : Plated axial lead solderable per MIL-STD-750,
method 2026
· Polarity : Color band denotes cathode end
· Mounting Position : Any
· Weight : 0.012 ounce, 0.34 gram
0.205(5.2)
0.166(4.2)
0.034(0.9)
0.028(0.7)
DIA.
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
Maximum Ratings And Electrical Characteristics
(Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive
load. For capacitive load, derate by 20%)
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375"(9.5mm) lead length TA=75
Peak forward surge current 8.3ms single
half sine-wave superimposed on rated load
(JEDEC method) at TA=75
Maximum instantaneous forward voltage
at 1.0A
Maximum DC reverse current at rated DC
blocking voltage
Maximum full load reverse current full cycle
average. 0.375"(9.5mm) lead length at
TL=55
Maximum reverse recovery time (Note 1)
Typical junction capacitance (Note 2)
Operating junction and storage
temperature range
Symbols 1N4933 1N4934 1N4935 1N4936 1N4937
VRRM
50
100
200
400
600
VRMS
35
70
140
280
420
VDC
50
100
200
400
600
I(AV)
1.0
IFSM
30.0
VF
1.3
5.0
IR
100
Trr
150
CJ
15.0
TJ
TSTG
-65 to +150
Notes:
(1) Test conditions: IF=1.0A, VR=30V, di/dt=50A/ S, and Irr=10%IRM.
(2) Measured at 1MHz and applied reverse voltage of 4.0 Volts.
Units
Volts
Volts
Volts
Amp
Amps
Volts
A
ns
pF