MTE115P10KJ3 Datasheet, PDF (2/9 Pages) Cystech Electonics Corp. – P-Channel Enhancement Mode Power MOSFET

Spec. No. : C165J3
CYStech Electronics Corp.
Issued Date : 2015.06.11
Revised Date :
Absolute Maximum Ratings (TC=25°C, unless otherwise noted)
Parameter
Symbol
Limits
Unit
Drain-Source Voltage
Gate-Source Voltage
VDS
VGS
-100
±20
V
Continuous Drain Current @ TJ=175°C, TC=25°C, VGS=-10V
-14
(Note 1)
Continuous Drain Current @ TJ=175°C,TC=100°C, VGS=-10V
ID
-9.9
(Note 1)
Continuous Drain Current @TA=25°C, VGS=-10V
Continuous Drain Current @TA=70°C, VGS=-10V
(Note 2) _IDSM
(Note 2)
-3.3
-2.6
A
Pulsed Drain Current
(Note 3) IDM
-56
Avalanche Current
(Note 3) IAS
-14
Avalanche Energy @ L=0.7mH, ID=-14A, RG=25Ω
(Note 2) EAS
68
mJ
Total Power Dissipation
TC=25°C
TC=100°C
TA=25°C
TA=70°C
(Note 1)
PD
50
(Note 1)
25
W
(Note 2) _PDSM
2.5
(Note 2)
1.6
Operating Junction and Storage Temperature Range
Tj, Tstg -55~+175
°C
Thermal Data
Parameter
Thermal Resistance, Junction-to-case
Thermal Resistance, Junction-to-ambient, t≤10s (Note 2)
Thermal Resistance, Junction-to-ambient, steady state
Symbol
RθJC
RθJA
Typical
2.7
15
40
Maximum
3
18
50
Unit
°C/W
Note : 1.The power dissipation PD is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful
in setting the upper dissipation limit for cases where additional heatsinking is used.
2. The value of RθJA is measured with the device mounted on 1 in²FR-4 board with 2 oz. copper, in a still air
environment with TA=25°C. The power dissipation PDSM is based on RθJA and the maximum allowed junction
temperature of 150°C. The value in any given application depends on the user’s specific board design.
3. Pulse width limited by junction temperature TJ(MAX)=175°C. Ratings are based on low frequency and low duty
cycles to keep initial TJ=25°C.
MTE115P10KJ3
CYStek Product Specification