GBL4J Datasheet, PDF (1/2 Pages) Cystech Electonics Corp. – Glass passivated Single Phase Bridge Rectifiers

CYStech Electronics Corp.
Glass passivated Single Phase Bridge Rectifiers
GBL4A thru GBL4M
Reverse Voltage 50 to 1000V Forward Current 4 Amps
Spec. No. : C760
Issued Date : 2014.12.04
Revised Date :
Page No. : 1/1
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Ideal for printed circuit boards
• Glass passivated chip junction
• High surge current capability
Mechanical Data
• Case: GBL(2S) Molded plastic body
Equivalent circuit
• Terminals: Matte tin plated leads,
solderable per MIL-STD-750, method 2026
• High temperature soldering guaranteed :
260°C/10 seconds, 0.375”(9.5mm) lead length, 5lbs(2.3kg) tension
• Mounting position: Any.
• Polarity : shown on front side of case, positive lead by beveled corner.
• Weight: 2.1gram, 0.074 oz.
Maximum Ratings and Electrical Characteristics
(Rating at 25°C ambient temperature unless otherwise specified.)
Parameter
Type
Symbol
GBL4A GBL4B GBL4D GBL4G GBL4J
Repetitive peak reverse voltage
VRRM
50
100
200
400
600
Maximum RMS voltage
VRMS
35
70
140
280
420
Maximum DC blocking voltage
VDC
50
100
200
400
600
Maximum instantaneous forward
voltage drop per leg, IF=1A
VF
1
Maximum average forward TC=50°C
rectified output current at T_A=40°C
IF(AV)
4.0 (Note 1)
3.0 (Note 2)
Peak forward surge current @ 8.3ms
single half sine wave superimposed
IFSM
150
on rated load (JEDEC method)
Rating for fusing (t<8.3ms)
93
Maximum DC reverse
TA=25°C
current at rated DC
IR
blocking voltage per leg ^TA=125°C
10
500
Typical thermal resistance per leg
RθJA
RθJL
32 (Note 2)
3.5 (Note 1)
Storage temperature range
Tstg
-55 ~ +150
Operating junction temperature range
TJ
-55 ~ +150
Notes : 1.Unit mounted on 3.0”×3.0”×0.11” thick (7.5 cm×7.5cm×0.3cm) Al plate
2.Unit mounted on PCB at 0.375”(9.5mm) lead length and 0.5”×0.5”(13mm×13mm) copper pads.
GBL4K
800
560
800
Units
GBL4M
1000 V
700 V
1000 V
V
A
A
μA
°C /W
°C
°C
GBL4A-GBL4M
CYStek Product Specification