GBL4AU Datasheet, PDF (1/2 Pages) Cystech Electonics Corp. – Glass passivated Single Phase Bridge Rectifiers

CYStech Electronics Corp.
Glass passivated Single Phase Bridge Rectifiers
GBL4AU thru GBL4MU
Reverse Voltage 50 to 1000V Forward Current 4 Amps
Spec. No. : C760
Issued Date : 2009.05.14
Revised Date :
Page No. : 1/2
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Ideal for printed circuit boards
• Glass passivated chip junction
• High surge current capability
• High case dielectric strength
• Typical IR less than 0.1μA
• UL recognized #E241476
Mechanical Data
• Case: GBL Molded plastic body
Equivalent circuit
• Terminals: Matte tin plated leads,
solderable per J-STD-002B and JESD22-B102D
• High temperature soldering guaranteed :
260°C/10 seconds, 0.375”(9.5mm) lead length, 5lbs(2.3kg) tension
• Mounting position: Any.
• Polarity : shown on front side of case, positive lead by beveled corner.
• Weight: 2.1gram, 0.074 oz.
Maximum Ratings and Electrical Characteristics
(Rating at 25°C ambient temperature unless otherwise specified.)
Parameter
Type
Symbol
Units
GBL4AU GBL4BU GBL4DU GBL4GU GBL4JU GBL4KU GBL4MU
Repetitive peak reverse voltage
VRRM
50
Maximum RMS voltage
VRMS
35
Maximum DC blocking voltage
VDC
50
Maximum instantaneous forward
voltage drop per leg, IF=2A
VF
Maximum average forward TC=50°C
rectified output current at T_A=40°C
IF(AV)
Peak forward surge current @ 8.3ms
single half sine wave superimposed
IFSM
on rated load (JEDEC method)
Rating for fusing (t<8.3ms)
100
200
400
600
800
1000 V
70
140
280
420
560
700 V
100
200
400
600
800
1000 V
1
V
4.0 (Note 1)
3.0 (Note 2)
A
150
A
93
Maximum DC reverse
TA=25°C
current at rated DC
IR
blocking voltage per leg ^TA=150°C
10
500
Typical thermal resistance per leg
RθJA
RθJL
22 (Note 2)
3.5 (Note 1)
Typical junction capacitance per
Leg at 4V, 1MHz
CJ
95
40
Storage temperature range
Tstg
-55 ~ +150
Operating junction temperature range
TJ
-55 ~ +150
Notes : 1.Unit mounted on 3.0”×3.0”×0.11” thick (7.5 cm×7.5cm×0.3cm) Al plate
2.Unit mounted on PCB at 0.375”(9.5mm) lead length and 0.5”×0.5”(13mm×13mm) copper pads.
μA
°C /W
pF
°C
°C
GBL4AU-GBL4MU
CYStek Product Specification