CFR10XLB Datasheet, PDF (1/3 Pages) Cystech Electonics Corp. – 1.0Amp. Fast Recovery Rectifiers

CYStech Electronics Corp.
Spec. No. : C340LB
Issued Date : 2003.06.26
Revised Date :
Page No. : 1/3
CFR10XLB Series
1.0Amp. Fast Recovery Rectifiers
Features
• Low forward voltage drop and low leakage current
• High current capability
• High surge current capability
• Plastic material used carries UL flammability classification 94V-0 utilizing flame retardant epoxy molding
compound.
• High temperature soldering: 250°C/10 seconds at terminals
• High reliability
Mechanical Data
• Case: DO-41 Molded Plastic.
• Terminals: Axial leads, solderable per MIL-STD-202, Method 208
• Polarity: Color band denotes cathode end.
• Mounting Position: Any
• Weight: 0.34 grams
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or
inductive load. For capacitive load, derate current by 20%.
Type Number
CFR101 CFR102 CFR103 CFR104 CFR105 CRF106 CFR107 Units
Maximum Recurrent Peak Reverse Voltage
50
100 200 400 600 800 1000 V
Maximum RMS Voltage
35
70
140 280 420 560 700 V
Maximum DC Blocking Voltage
50
100
200 400 600
800 1000 V
Maximum Average Forward Rectified Current
.375”(9.5mm) lead length at TA=75°C
1
A
Peak Forward Surge Current, 8.3ms Single Half
Sine-wave Superimposed on Rated Load(JEDEC
30
A
method)
Maximum Instantaneous Forward Voltage @
1.0A
1.3
V
Maximum DC Reverse Current at Rated DC
Blocking Voltage
5 (@Ta=25°C)
100 (@Ta=100°C)
µA
Typical Junction Capacitance (Note 1)
15
pF
Maximum Reverse Recovery Time(Note 2)
150
250
500
ns
Operating Temperature Range Tj
-65 to +150
°C
Storage Temperature Range Tstg
-65 to +150
°C
Notes : 1. Measured at 1 MHz and applied reverse voltage of 4.0Volts
2 .Test Condition : IF=0.5A, IR=1A, IRR=0.25A.
CFR10XLB
CYStek Product Specification