ES278 Datasheet, PDF (17/25 Pages) Cyrustek corporation – 4000 Counts Manual DMM

ES278
4000 Counts Manual DMM
Measurement Mode Switching (Continued)
Measurement mode depends on the logic level of SLACDC, FC1, FC2, FC3, FC4, FC5 and KEY
selection. When FC6 is low (pulled to V-), the capacitance measurement and extra current
measurement mode lists are shown below:
SLACDC FC1 FC2 FC3 FC4 FC5
0
0
0
1
1
X
0
0
1
1
0
X
0
0
1
0
1
X
0
1
0
0
1
X
0
1
0
1
0
X
0
1
1
0
0
X
0
0
1
0
0
X
0
0
0
1
0
X
0
1
1
1
1
X
0
1
1
1
0
X
0
1
0
0
0
1
0
0
0
0
1
1
1
1
0
0
0
1
1
0
0
0
1
1
0
1
0
0
0
0
0
0
0
0
1
0
1
1
0
0
0
0
1
0
0
0
1
0
Note:
Mode
4.000 nF
40.00 nF
400.0 nF
4.000 uF
40.00 uF
400.0 uF
4.000 mF
40.00 mF
Cap (AUTO)
200.0 MΩ
DC 40.00 mA¹²
DC 400.0 uA¹²
AC 40.00 mA¹²
AC 400.0 uA¹²
DC 40.00 mA¹²
DC 400.0 uA¹²
AC 40.00 mA¹²
AC 400.0 uA¹²
KEY selection & Remaks
----
----
----
----
----
----
----
----
----
----
DCmA ↔ ACmA
DCuA ↔ ACuA
ACmA ↔ DCmA
ACuA ↔ DCuA
----
----
----
----
1. These modes could be designed for multi-meter current modes, please refer to section 1.2.
2. These modes could be designed for clamp-meter current modes, please refer to section 1.3.
\
V 1.5
17
2015/12/11