FM24CL16B_13 Datasheet, PDF (8/14 Pages) Cypress Semiconductor – 16Kb Serial 3V F-RAM Memory

FM24CL16B - 16Kb 3V I2C F-RAM
Electrical Specifications
Absolute Maximum Ratings
Symbol
Description
V_DD
Power Supply Voltage with respect to V_SS
V_IN
Voltage on any pin with respect to V_SS
T_STG
T_LEAD
V_ESD
Storage Temperature
Lead temperature (Soldering, 10 seconds)
Electrostatic Discharge Voltage
- Human Body Model (AEC-Q100-002 Rev. E)
- Charged Device Model (AEC-Q100-011 Rev. B)
- Machine Model (AEC-Q100-003 Rev. E)
Package Moisture Sensitivity Level
Ratings
-1.0V to +5.0V
-1.0V to +5.0V
and V_IN < V_DD+1.0V *
-55 C to + 125 C
260 C
4kV
1.25kV
300V
MSL-1
* Exception: The “VIN < VDD+1.0V” restriction does not apply to the SCL and SDA inputs.
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating
only, and the functional operation of the device at these or any other conditions above those listed in the operational section of this
specification is not implied. Exposure to absolute maximum ratings conditions for extended periods may affect device reliability.
DC Operating Conditions (T_A = -40 C to + 85 C, V_DD =2.7V to 3.65V unless otherwise specified)
Symbol
Parameter
Min
Typ
Max Units
V_DD
Main Power Supply
I_DD
VDD Supply Current
@ SCL = 100 kHz
@ SCL = 400 kHz
@ SCL = 1 MHz
2.7
3.3
3.65
V
100
A
170
A
300
A
I_SB
Standby Current
I_LI
Input Leakage Current
I_LO
Output Leakage Current
V_IH
Input High Voltage
V_IL
Input Low Voltage
V_OL
Output Low Voltage
@ I_OL = 3.0 mA
R_IN
WP Input Resistance (WP)
For V_IN = V_IL (max)
For V_IN = V_IH (min)
0.7 V_DD
-0.3
40
1
3
6
A
±1
A
±1
A
V_DD + 0.3
V
0.3 V_DD
V
0.4
V
K
M
V_HYS
Input Hysteresis (Does not apply to WP)
0.05 V_DD
V
Notes
1
2
3
3
5
4
Notes
1. SCL toggling between V_DD-0.3V and V_SS, other inputs V_SS or V_DD-0.3V.
2. SCL = SDA = V_DD. All inputs V_SS or V_DD. Stop command issued.
3. V_IN or V_OUT = V_SS to V_DD. Does not apply to the WP pin.
4. This parameter is characterized but not tested.
5. The input pull-down circuit is strong (40K ) when the input voltage is below V_IL and much weaker (1M )
when the input voltage is above V_IH.
Document Number: 001-84456 Rev. *A
Page 8 of 14