S6E1A11B0A Datasheet, PDF (5/95 Pages) Cypress Semiconductor – 32-Bit ARM® Cortex® FM0+ based Microcontroller

S6E1A11B0A/C0A
S6E1A12B0A/C0A
1. Product Lineup
Memory Size
Product name
On-chip Flash memory
On-chip SRAM
56 Kbyte
6 Kbyte
S6E1A11B0A
S6E1A11C0A
Function
Product name
Pin count
CPU
Frequency
Power supply voltage range
DMAC
Multi-function Serial Interface
(UART/CSIO/I²C)
Base Timer
(PWC/Reload timer/PWM/PPG)
A/D start compare
Multi-functio
n
Timer
QPRC
Input capture
Free-run timer
Output compare
Waveform
generator
PPG
Dual Timer
Real-time Clock
Watch Counter
Watchdog timer
External Interrupt
I/O port
12-bit A/D converter
CSV (Clock Supervisor)
LVD (Low-voltage Detection)
Built-in CR
High-speed
Low-speed
Debug Function
Unique ID
S6E1A11B0A
S6E1A12B0A
32
Cortex-M0+
40 MHz
2.7 V to 5.5 V
2 ch.
3 ch. (Max)
ch.0/ch.1/ch.3: FIFO
4 ch. (Max)
6 ch.
4 ch.
3 ch.
6 ch.
3 ch.
3 ch.
1 unit
1 ch.
1 unit
1 unit
1 unit
1 ch. (SW) + 1 ch. (HW)
8 pins (Max) + NMI × 1
23 pins (Max)
5 ch. (1 unit)
Yes
2 ch.
4 MHz
100 kHz
SW-DP
Yes
88 Kbyte
6 Kbyte
S6E1A12B0A
S6E1A12C0A
48/52
S6E1A11C0A
S6E1A12C0A
37 pins (Max)
8 ch. (1 unit)
Note:
• All signals of the peripheral function in each product cannot be allocated by limiting the pins of package. It is necessary to use
the port relocate function of the I/O port according to your function use.
See "14. ELECTRICAL CHARACTERISTICS 14.4 AC Characteristics 14.4.3 Built-in CR Oscillation Characteristics" for
accuracy of built-in CR.
Document Number: 002-05091 Rev.*A
Page 5 of 95