CYIL1SM0300AA_09 Datasheet, PDF (4/31 Pages) Cypress Semiconductor – LUPA-300 CMOS Image Sensor

CYIL1SM0300AA
Features and General Specifications
Table 1. General Specifications
Feature
Electronic shutter type
Windowing (ROI)
Sub-sampling
Read out direction
Extended dynamic range
Programmable gain
Programmable offset
Specification/Description
Full snapshot shutter (integration during read out is possible)
Randomly programmable ROI read out. Implemented as scanning of lines/columns from an
uploaded position
Sub sampling is possible (only in the Y-direction)
Sub-sampling pattern: Y0Y0Y0Y0
Read out direction can be reversed in X and Y
Multiple slope (up to 90 dB optical dynamic range)
Range x1 to x16, in 16 steps using 4-bits programming
256 steps (8 bit)
Digital output
Supply voltage VDD
Logic levels
Operational temperature range
Interface
Package
Power dissipation
Mass
On-chip 10-bit ADCs at 80 Msamples/s
Nominal 2.5V (some supplies require 3.3V)
2.5V
–40°C to 70°C; with degradation of dark current
Serial-to Parallel Interface (SPI)
48-pin LCC
<190 mW
±1g
Electrical Specifications
Table 2. Absolute Maximum Ratings
Symbol
Parameter
Value
Unit
V_DD
V_IN
V_OUT
I_IO
T_L
DC supply voltages
–0.5 to 3.5
V
DC input voltage
–0.5 to 3.5
V
DC output voltage
–0.5 to 3.5
V
DC current on any single pin
+/– 50
mA
Lead temperature (5 seconds soldering)
350
ºC
Absolute Ratings are those values beyond which damage to the device may occur.
V_DD = V_DDD = V_DDA (V_DDD is supply to digital circuit, V_DDA to analog circuit)
Document Number: 001-00371 Rev. *F
Page 4 of 31
[+] Feedback