CY8C5888LTQ-LP097 Datasheet, PDF (33/52 Pages) Cypress Semiconductor – PSoC® Programmable System-on-Chip

CY8C24633
AC Operational Amplifier Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75 V to 5.25
and –40 °C  T_A  85 °C, or 3.0 V to 3.6 V and –40 °C  T_A  85 °C, respectively. Typical parameters apply to 5 V and 3.3 V at 25 °C
and are for design guidance only.
Settling times, slew rates, and gain bandwidth are based on the Analog continuous time PSoC block.
Power = high and opamp bias = high is not supported at 3.3 V.
Table 24. 5 V AC Operational Amplifier Specifications
Symbol
Description
Min Typ Max Units
T_ROA
Rising settling time from 80% of V to 0.1% of
V (10 pF load, unity gain)
Power = low, opamp bias = Low
–
Power = medium, opamp bias = high
–
Power = high, opamp bias = high
–
–
3.9
s
–
0.72 s
–
0.62 s
T_SOA
Falling settling time from 20% of V to 0.1% of
V (10 pF load, unity gain)
Power = low, opamp bias = low
–
Power = medium, opamp bias = high
–
Power = high, opamp bias = high
–
–
5.9
s
–
0.92 s
–
0.72 s
SR_ROA Rising slew rate (20% to 80%)(10 pF load, unity
gain)
0.15
–
Power = low, opamp bias = low
1.7
–
Power = medium, opamp bias = high
6.5
–
Power = high, opamp bias = high
–
V/s
–
V/s
–
V/s
SR_FOA Falling slew rate (20% to 80%)(10 pF load,
unity gain)
0.01
–
Power = low, opamp bias = low
0.5
–
Power = medium, opamp bias = high
4.0
–
Power = high, opamp bias = high
–
V/s
–
V/s
–
V/s
BW_OA
Gain bandwidth product
Power = low, opamp bias = low
Power = medium, opamp bias = high
Power = high, opamp bias = high
0.75
–
3.1
–
5.4
–
–
MHz
–
MHz
–
MHz
Notes
Document Number: 001-20160 Rev. *H
Page 33 of 52